0 Cart
Added to Cart
    You have items in your cart
    You have 1 item in your cart
      Total

      Guides — astrophotography

      DSLR - Stacking Nightscape Photographs

      DSLR - Stacking Nightscape Photographs

      Nightscape photography can certainly be a challenging form of photography and knowing your equipment and how to capture light can certainly benefit the quality of your photograph.

      So why do we want to stack our nightscape photographs, well the answer is simple! By stacking our photographs we end up with a final result that is much cleaner to look at and more detailed.

      When we shoot the night sky it's important to try and get the best exposure in camera rather than ramping up any kind of exposure setting during post processing, the problem with this is we often find ourselves cranking up our ISO if our aperture is wide open and our exposure is maxed out!

      So what happens when we photograph with higher ISO, well we start to introduce a thing called noise into our image but not only do we increase the amount of camera noise in our photograph but we reduce the dynamic range / tones of our photograph. 

      This is where stacking can play a big part in increasing the signal to noise ratio, increasing the dynamic range which all equates to a nice clean photograph that we can print and display in all it's glory!

      Stacking nightscape photographs used to be extremely difficult and time consuming, it used to take me an hour to stack a few images making sure stars are all manually aligned and the foreground is also aligned. Thankfully there is a piece of free software out there called Sequator.....my lifesaver!!!

      Sequator can stack a nightscape image of 5 photographs for me in just under 20 seconds and it does a fantastic job too!

      Below is a single photograph taken with a Nikon Z7, ISO 10,000 with a Nikon 50mm F1.8s lens at F/1.8, you can clearly see how much noise is in the photo.

      Now lets have a look at the same photograph, same settings with 5 images stacked.

      Can you see the difference? It might be a little hard to see with smaller photographs however look at the water, you can clearly see the difference and in the sky. The second photograph with a stack of 5 images is so much cleaner!

      If your interested in seeing how I did this using the software Sequator which can be downloaded for free, please be aware though this software is for PC users only. If your a Mac user you may wish to use a program called Starry Landscape Stacker.

       Please check back as this blog post and video may be revised and updated. Also if you enjoyed the video and would like to see more of my YouTube journey then please don't forget to subscribe!

      Moon Processing

      Moon Processing

      There are so many ways you can go about processing photographs and this is why I don't sell tutorials, instead what I like to do is share my knowledge and hope that it assists with those who would like to see how I process my work.

      Registax is a free piece of software and often used for planetary imaging, the whole idea of registax is to help you create a much cleaner and detailed image while trying to mitigate atmospheric turbulence. 


      You may wonder why your images of the moon don't come out as sharp as others and one of those factors has to do with atmospheric turbulence... when we use long focal length lenses or telescopes we are magnifying that area of the sky, if we have a lot of atmospheric turbulence it would seem like your looking at the ground on a hot day and all that heat haze is rising which makes the landscape your looking at look a little less clear than normal.

      Well by taking many images throughout the night at different times you have the chance at capturing moments of the moon when the atmosphere is a little more still which then results in a cleaner moon photo. 

      Registax helps with this, you upload all your moon photos and then pick the best % of images to stack yielding in a much more detailed and cleaner moon photograph.

      Enjoy the video below and see how I do it.... If you like the video please leave a comment of subscribe to my YouTube channel. 

      -Steve-